In doing Asbestos testing properly, it’s essential to understand what you’re testing for precisely. Samples are collected by placing fibre sample pads in special vials. The actual location of the fibres in question can usually be located using a Geomancy Microscope, although an Asbestos Abatement Specialist should be able to advise in more detail. The actual sample can then be sent to a laboratory to be examined under the appropriate conditions.
When testing for Asbestos, it’s essential to understand the different methods that are currently in use. It’s generally accepted that airborne particles containing Asbestos minerals can be inhaled without any negative consequences. Therefore, there are various standard testing methods for determining if Asbestos is present in a given area. Commonly, samples are tested for airborne Asbestos concentration using specially designed air sampling equipment.
Several standard tests can be performed where Asbestos is detected on surfaces, including pre-fabricated floor tiles, pre-cut ceiling tiles and pre-made roof tiles. However, before these options are considered suitable candidates for Asbestos removal, it’s necessary to obtain the relevant information from your local regulations. Most local authorities require prior written permission to carry out Asbestos testing on commercial or public property.
There are currently three methods of MPA Asbestos testing Adelaide currently recognised in the United Kingdom. These include: using Templates, Sub-slab depressurisation and borehole testing. All of these methods use a similar approach and are quite effective in detecting the presence of Asbestos in a variety of surface materials. However, a significant limitation to using Templates is that the samples need to be collected at regular intervals, and a large area can quickly become difficult to monitor.
The most common MPA Asbestos testing Adelaide kit currently available on the market is the borehole/sub-floor method. This method is performed using specially designed machinery known as a borehole camera. The borehole camera is inserted into the hole to locate the entrance to the home’s interior quickly. After locating the entrance, the camera is lowered into the ground, and various sample materials are deposited into the borehole. Once the samples have been deposited into the hole, they can be processed by various laboratory equipment. Once the sample has been prepared for analysis, it can then be sent to a reputable Asbestos laboratory.
The second method of Asbestos testing currently available in the UK uses sub-flooring insulation. In this method, an air sample is taken and analysed using specific Air Samples Sampling equipment. The air samples are then analysed using various Asbestos testing instruments to determine the presence of Asbestos in the home. Because this type of Asbestos testing can be completed quickly and efficiently, it is often the method most law firms and other businesses require to conduct regular Asbestos surveys to ensure compliance with their legal obligations.
As previously stated, there are many different options for the testing of Asbestos in the home. Unfortunately, most homeowners are not aware of the legal responsibilities regarding removing their loved ones’ risk of exposure to Asbestos. Therefore, it is in every homeowner’s best interest to seek professional consultation regarding the safe management of the Asbestos present in the home. Asbestos abatement professionals will be able to provide their clients with the necessary information regarding Asbestos removal and Asbestos abatement for their home and the steps that need to be taken in the future. Asbestos testing kits are easily obtainable online. When purchasing these kits, it is essential to ensure that you purchase ones of the highest quality possible.